If you don’t have enough attic insulation, your home’s air conditioning and heating systems have to work harder, which causes them to wear out faster. Low attic insulation levels also make it easy for cold air to enter during the winter and hot air to escape during the summer, increasing energy costs.

To maximize the efficiency of your HVAC system and save on utility bills, you need to insulate your attic with a material that matches the R-value recommended for your climate zone and local building codes. You can choose from many types of Insulation Contractor, including blankets, boards, and materials that can be poured or blown in place. But remember that the maximum R-value a product offers depends on its proper installation.

Improve Air Quality with Attic Spray Foam Insulation

Batt or blanket insulation is easy to install and can help achieve the required R-value for your attic, depending on the thickness you require. The best choices are fiberglass or cellulose (recycled paper products) insulation. Fiberglass batts are the easiest to work with, and they can be purchased for as little as 50 cents per square foot. If you want to add cellulose insulation, opt for wet-spray cellulose. This type uses less moisture and is treated with boric acid, helping to keep rodents away.

Blown-in or loose-fill insulation uses a blowing machine to spray small particles of cellulose, fiberglass, or mineral wool into your attic space, filling gaps and covering surfaces evenly. Its comprehensive coverage makes it ideal for existing attics, and it is more cost-effective than other insulation types. However, it can settle over time, reducing its R-value. It can also absorb moisture, which can cause mold and mildew problems.

Keystone Premier Spray Foam Insulation
8 Azalea Dr, Windsor, PA 17366, United States
717-501-3718

A Insulation Contractor with proper attic insulation is more comfortable, healthier, and saves money. In fact, homeowners can save 15-50% on their energy bills if they have enough insulation. This is because your heating and cooling systems work less hard in a well-insulated attic. Insulation is measured by its R-value, which tells you how much heat it can prevent from passing through per inch. The Department of Energy recommends a minimum R-30 rating for homes. Choosing the right insulation type depends on many factors, including where you live and your budget.

Why Choose Coastline Insulation for Your Attic Insulation Needs

You can purchase a DIY kit to do your own attic insulation, but it’s usually best to hire a professional installer. A professional can ensure that you don’t block air vents or make other mistakes that can compromise the insulating performance of your attic.

Fiberglass batt insulation is the most common attic insulation. It consists of tiny slivers of glass that were once sand and other recycled materials. It is rolled into sheets called “batts” and treated with vapor to act as an adhesive. Fiberglass is a planet-friendly type of attic insulation and helps to reduce your energy consumption.

Blown-in cellulose is another attic insulation option. It’s made from a mix of recycled products, including wood, newspapers, and cardboard. It’s then treated with boric acid and other substances to make it flame resistant. It’s also eco-friendly, because it can be reused, and doesn’t require new production. It has a higher R-value than fiberglass and is better at filling gaps, cracks, or awkward areas.

Coastline Insulation
268 Serenoa Rd Unit 2B, Santa Rosa Beach, FL 32459
(850)-565-1027

316 Insulation of Olympia acts as both an air barrier and an insulator. It is designed to seal the nooks and crannies that allow energy to escape your home, leading to high heating and cooling costs. This product fills these areas, making your building more efficient and cutting utility bills by 50% right away.

It can help your walls retain their strength, and it is also more moisture resistant than fiberglass and cellulose insulation. This helps to protect your property from mildew and mold, which can have a negative impact on health.

The Benefits of Spray Foam Insulation for Olympia Homes

There are two types of spray foam: open-cell and closed cell. The difference is in the way the small bubbles that form the foam are encapsulated. The open-cell spray foam has small pockets that are deliberatly left open, which gives it a softer feel and more flexibility than the closed cell spray foam.

Both of these products are available in different R-values. The higher the R-value, the more insulating the foam is. For example, open-cell foam has an R-value of around 3.5 to 3.6 per inch, while closed-cell spray insulation can provide up to R-19 in a 2×4 wall.

The installation of spray foam insulation requires professional technicians, and it is recommended that occupants of the property vacate the premises during application and curing, since this product off-gasses large amounts of volatile organic compounds (VOCs). For your own safety, it’s best to wear gloves, goggles, and breathing apparatuses when applying spray foam.

316 Insulation of Olympia
2511 Columbia St SW Olympia WA 98501
253-332-7606