If you don’t have enough attic insulation, your home’s air conditioning and heating systems have to work harder, which causes them to wear out faster. Low attic insulation levels also make it easy for cold air to enter during the winter and hot air to escape during the summer, increasing energy costs.

To maximize the efficiency of your HVAC system and save on utility bills, you need to insulate your attic with a material that matches the R-value recommended for your climate zone and local building codes. You can choose from many types of Insulation Contractor, including blankets, boards, and materials that can be poured or blown in place. But remember that the maximum R-value a product offers depends on its proper installation.

Improve Air Quality with Attic Spray Foam Insulation

Batt or blanket insulation is easy to install and can help achieve the required R-value for your attic, depending on the thickness you require. The best choices are fiberglass or cellulose (recycled paper products) insulation. Fiberglass batts are the easiest to work with, and they can be purchased for as little as 50 cents per square foot. If you want to add cellulose insulation, opt for wet-spray cellulose. This type uses less moisture and is treated with boric acid, helping to keep rodents away.

Blown-in or loose-fill insulation uses a blowing machine to spray small particles of cellulose, fiberglass, or mineral wool into your attic space, filling gaps and covering surfaces evenly. Its comprehensive coverage makes it ideal for existing attics, and it is more cost-effective than other insulation types. However, it can settle over time, reducing its R-value. It can also absorb moisture, which can cause mold and mildew problems.

Keystone Premier Spray Foam Insulation
8 Azalea Dr, Windsor, PA 17366, United States
717-501-3718

A Insulation Contractor with proper attic insulation is more comfortable, healthier, and saves money. In fact, homeowners can save 15-50% on their energy bills if they have enough insulation. This is because your heating and cooling systems work less hard in a well-insulated attic. Insulation is measured by its R-value, which tells you how much heat it can prevent from passing through per inch. The Department of Energy recommends a minimum R-30 rating for homes. Choosing the right insulation type depends on many factors, including where you live and your budget.

Why Choose Coastline Insulation for Your Attic Insulation Needs

You can purchase a DIY kit to do your own attic insulation, but it’s usually best to hire a professional installer. A professional can ensure that you don’t block air vents or make other mistakes that can compromise the insulating performance of your attic.

Fiberglass batt insulation is the most common attic insulation. It consists of tiny slivers of glass that were once sand and other recycled materials. It is rolled into sheets called “batts” and treated with vapor to act as an adhesive. Fiberglass is a planet-friendly type of attic insulation and helps to reduce your energy consumption.

Blown-in cellulose is another attic insulation option. It’s made from a mix of recycled products, including wood, newspapers, and cardboard. It’s then treated with boric acid and other substances to make it flame resistant. It’s also eco-friendly, because it can be reused, and doesn’t require new production. It has a higher R-value than fiberglass and is better at filling gaps, cracks, or awkward areas.

Coastline Insulation
268 Serenoa Rd Unit 2B, Santa Rosa Beach, FL 32459
(850)-565-1027

The high R-value of Bryars Spray Foam makes it a powerful barrier that restricts air movement. This helps homeowners save money on energy bills while improving indoor comfort, and reducing airborne pollutants like mold, dust, and pollen.

In many cases, spray foam insulation can pay for itself in just a few years by lowering utility costs. It is especially effective in attics and basements, and in rim joist, knee walls and bonus rooms of new construction homes. However, it can also be used in retrofit applications such as insulating metal buildings and pole barns.

Energy Savings Made Easy with Bryars Spray Foam Insulation

Foam insulation is a versatile material that can be sprayed into any area of a home or building. It is typically applied with a professional rig that ensures the foam is mixed and sprayed correctly every time. A large variety of nozzles can be attached to the rig to target different areas, such as attics and rim joist in existing homes or exposed walls in new construction projects.

Spray foam insulation acts as both an air barrier and insulation, closing all those nooks and crannies where conditioned air escapes. This greatly reduces the workload on the HVAC system, which can significantly lower your monthly energy bills.

Spray foam also stops cold air from entering the house during winter and warm air from leaving during summer, which reduces the need for heating or cooling. This will drastically lower your utility bills, while helping you keep a comfortable temperature all year round.

Bryars Spray Foam
Elrod, Alabama
(205) 576-5009